Destiny apex 6100 Uživatelský manuál stáhnout pdf (Strana 16)

- Sunrise / Sunset Lighting -

Sure Action Photo Cell, 12 volt

1) At sunset the photocell will provide a short circuit to activate Zone 16 and signal the system

that it is dark. At sunrise the photocell will remove the short circuit to restore Zone 16 and

signal the system that it is light.

2) At sunset the system sends an ON command to Control Channel 33 which sends an A1 ON

X-10 command to turn on the flood lights. Control Channel 33 will send an A1 OFF X-10

command to turn off the flood lights after the programmed countdown time.

3) Entering the front door with the system armed to Away or Home will cause the system to

activate the pre-alarm countdown. If it is dark the system will also send an ON command to

Control Channel 34. Control Channel 34 will send an A2 ON X-10 command to turn on the

hall lights. The hall lights will remain on until manually turned off.

Sequence of Operation

System Sequence of Events

Objective Equipment List

¨ Apex Destiny 6100 control panel, rev. 8.05 or greater

¨ X-10 PRO Power Line Interface Module, PSC05

¨ X-10 PRO Incandescent Wall Switch Module, PLW01 (qty 2)

¨ Sure Action 12VDC Photo Cell, SU-ON/OFF

Use a 12 volt

photocell to turn

on flood lights at

sunset and

provide lighted

pre-alarm entry

after sunset.

At sunset each day, the system will turn on the flood lights and automatically turn them off after

a specified time period. When pre-alarm is activated the system will turn on the hall lights to

provide lighted entry only if it is dark outside.

Apex Technical Support 800-272-7937

Option 1

Page 1-9

- Application Note -

Security Enhancements

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 76 77

Žádné komentáře

Destiny apex 6100 Uživatelský manuál Strana 16